If architectural illumination - then only STARK MAX!
22.05.2020
Modern architects and designers who design the exterior of buildings are able to use a variety of tools to highlight the merits of the objects and hide their shortcomings. Architectural lighting remains one of the most sought-after tools. It can be done in different ways, but every year the popularity of LED lamps grows. This fact is not surprising, as LED-based devices have many unquestionable advantages. Knowing about this, specialists of the company «Svetovit» have developed a series of light-emitting diode lamps called STARK MAX.
STARK MAX has a power line of 13 positions ranging from 12 W to 120 W, universal dimensions ranging from 270 mm to 1470 mm, and low weight from 1.5 kg to 5.2 kg. All lamps have been tested for moisture, dust and impact resistance, and the IP protection level of 65 has been confirmed. The STARK MAX body is made of anodized aluminium. The lamp uses CREE light-emitting diodes. The lamp can be made in a wide range of 3,000-6,000 K and in GREEN, BLUE, RED - if necessary according to the design project.
Low power consumption, resistance to power-supply voltage fluctuations (90-305 V), high efficiency, does not require additional maintenance and specialized recycling, creates uniform lighting without shimmering. The lens is made of a thermally resistant polycarbonate and has high impact resistance and crystal transparency.
STARK MAX has a searchlight fixture "Lyra with adjustable 5 °slope" of stainless steel.
STARK MAX LED lamps use optics with the following types of CIL:
• Concentrated optics (K) 15° - for point illumination of objects or surfaces, has high radiation orientation and contrast.
• Optics, concentrated (K) 30° - for the illumination of individual zones, allows for a smaller area to be illuminated, but with greater brightness.
• Deep Optics (G) 60° - For illumination of interior, buildings and shop windows, the beam of light is directed towards the illuminated zone.
Architectural illumination is the interaction with the spatial environment in the dark. Thus, the goal of STARK MAX LED lamps is to preserve the character of the building and broadcast it to its target audience.
STARK MAX has a power line of 13 positions ranging from 12 W to 120 W, universal dimensions ranging from 270 mm to 1470 mm, and low weight from 1.5 kg to 5.2 kg. All lamps have been tested for moisture, dust and impact resistance, and the IP protection level of 65 has been confirmed. The STARK MAX body is made of anodized aluminium. The lamp uses CREE light-emitting diodes. The lamp can be made in a wide range of 3,000-6,000 K and in GREEN, BLUE, RED - if necessary according to the design project.
Low power consumption, resistance to power-supply voltage fluctuations (90-305 V), high efficiency, does not require additional maintenance and specialized recycling, creates uniform lighting without shimmering. The lens is made of a thermally resistant polycarbonate and has high impact resistance and crystal transparency.
STARK MAX has a searchlight fixture "Lyra with adjustable 5 °slope" of stainless steel.
STARK MAX LED lamps use optics with the following types of CIL:
• Concentrated optics (K) 15° - for point illumination of objects or surfaces, has high radiation orientation and contrast.
• Optics, concentrated (K) 30° - for the illumination of individual zones, allows for a smaller area to be illuminated, but with greater brightness.
• Deep Optics (G) 60° - For illumination of interior, buildings and shop windows, the beam of light is directed towards the illuminated zone.
Architectural illumination is the interaction with the spatial environment in the dark. Thus, the goal of STARK MAX LED lamps is to preserve the character of the building and broadcast it to its target audience.